Welcome to the website of Dongguan zhuochang precision mould parts Co., Ltd. we will provide you with our best service!
Zhuochang Precision

Focus on mold parts processing and production

14 years experience
  • Contact Mr. Deng:

    86-136 8608 3098

  • Contact Ms. Zhong:

    86-137-1205-1128

  • 6666-->
    4News center -> Industry information

    Punching needle is similar to other mechanical tools and parts, basically through physical changes, resulting in deformation, but the material remains unchanged Manufacturing process of punching needle

    1. Wire drawing and cutting

    The raw materials that have passed the test are drawn into the required diameter by wire drawing machine, and then cut into a rod-shaped punch blank with fixed length.

    2. Heat treatment

    Before heat treatment, the punching needle blank is straightened on the straightening platform with a dial indicator, and then it is put into a high frequency electric furnace or salt bath furnace to heat to 800 ~ 1300 ℃ for 2 ~ 5 minutes. After oil quenching and fine quenching, the hardness of the needle tip can reach hv590-800. Then it is tempered at low temperature.

    3. Grinding

    The punching needle is clamped on the spring collet of the machine tool, and the grinding process is carried out respectively according to the angle and size requirements of various sharp bases of the punching needle.

    4. Polishing

    Polishing is to clean the oil stains and rust on the surface and clean the surface.

    5. Inspection and warehousing

    According to the required index for inspection, qualified can be put into storage.

  • About us

    Profile Workshop Partner Case Messages
  • Products center

  • News center

    Company news Information Problem
  • Contact US

    Contact: Mr. Deng 86-13686083098
    Tel: 86-0769-89028198 / 88034678
    Email: 296207391@qq.com
    Address: No.11, chuangjian Road,Shangsha second
    industrial zone, Chang'an Town, Dongguan City
  • Mobile website QR code

    Mobile website QR code